Smartworks 89 52 60, Original Instructions Manual

Page: 6 / 18

2
Safety Notes

Recharge the battery only with the provided charger
cable.

Before starting any work on walls, floors or similar,
make sure that all power lines in the work area are
switched off at the main switchboard. Inspect the
proposed drill hole location for any utility lines (e. g.
water, gas, power) before drilling. Use a suitable
device such as a metal or electricity line detecting
device.

Do not charge the screwdriver outdoors.

Take special care of the screwdriver. Avoid dropping
it onto any hard surface and do not subject it to pres-
sure or any other form of mechanical stress. Keep
the screwdriver away from extreme heat and cold.

Do not attempt to repair the screwdriver. If any parts
are damage have them repaired by a qualified tech-
nician or contact your customer service.

Only charge, operate and store the screwdriver at an
ambient temperature between 10º C and 40º C.
Please note the included General Safety Notes
and the following safety notes to avoid mal-
functions, damage or physical injury:
Batteries and rechargeable batteries do
not belong in household garbage.
For battery disposal please check with your
local council.