13
Start-Up and Operation
Using the Air Compressor
The power cable, the air hose and the
tyre filling adaptor (5) are stored in the
compartments on the sides of the
compressor, and the adaptors are in the
drawer (3) under the handle. When the
compressor is laid flat the drawer can be
folded down over the handle after
opening.
Check that the switch (1) is set to position „OFF“, so the unit is
turned off.
Connect the compressor plug to a suitable wall socket.
The included tyre filling adaptor (5) can
be connected to the quick coupler on the
end of the air hose of the compressor.
To disconnect, pull back the securing
ring on the quick coupler.
The included adaptors (7 to 12) are
suitable for different applications (e. g.
football, volley ball, beach ball, inflatable
bed, bicycle tube Dunlop and Sclave-
rand). Attach it to the quick coupler on the Tyre filling adaptor (5).
Open the lever of the quick coupler and insert the desired adaptor in
the valve extension. Release the lever to clamp the adaptor.
Please observe Sclaverand valves have a locking ring which must
be unscrewed to allow the valve to open. After filling the tyre to the
desired pressure tighten the ring again.
Locking Ring
