ADMIN PASSWORD
The Admin Password is a specific security code for administrator to change the advanced
settings. The default admin password is 123456. Please use this function to change the
default admin password into your personal admin password. For the protection of your
system configuration, every time you change the advanced settings, you need to enter
the admin password. Please change the admin password periodically.
Note:
If you forgot your admin password, please long press the reset button on the camera DC
jack for 5 seconds to restore the password into factory default value 123456 (please refer
to the
Camera Overview
section). All settings will be restored to factory default. You will
need to configure your camera from the start.
EMAIL ALERT
The camera supports the motion detection function, which is capable of detecting
movements within the camera view, following with notifying user the sudden event with
push notification and/or email alert, system can also begin recording.
When motion detection is enabled and system detects movement:
-
System will begin recording.
-
With Push Notification enabled, system will send out notification message
user’s mobile device.
-
With Email Alert enabled, system will send out Email to alert user the event.
Function
Setting
Action (when movement is detected)
Email Alert
ON
Camera: Start video recording
Email account: Email alert
Push Notification
ON
Camera: Start video recording Mobile
Device: Text notification
Detection
OFF
Camera: Manual Recording
Email account: No action Mobile
Device: No action
Note:
By default, the system has been limited to send out the email alert every 1 minutes to
prevent overloading user’s email account.
22
Summary of Contents for 10.021.38
Page 19: ......
