SmarTrunk Systems ST-9116C, Service Manual, Page: 35 / 67

ST-9116C SM R 1.1 SMARTRUNK SYSTEMS, INC. 35
Figure 41: Fan operation control
Actual alignment value will be
displayed on alignment slider.
Press [Start] then move the slider to
reach the desired value.
As soon the desired value is
reached, press [Finish] to store the
value on repeater memory.
Typical
default alignment
correspond to a max temperature of
60° C in factory when the repeater
was calibrated.
If you want to retrieve factory
default, press [Factory] instead of
[Start]. You will be asked to confirm
the factory default alignment, and
then, if you confirm it, original
values from factory will be loaded
into current alignment settings.