Installation
Connect the supplied DSL cable to the DSL port on your gateway and
to the DSL wall jack installed by your provider.
Connect an Ethernet cable from your device (e.g., laptop) to the
ETH
port on the gateway.
Plug the power cord into the wall outlet and into the
Power
jack on
the back of the gateway.
Turn on the gateway by pressing the power switch on the back.
Your gateway is now being set up to connect to the Internet. It may take a
few minutes before you can begin using your Internet applications (email,
browser, etc.). If you are unable to connect to the Internet, verify that all
connections are in place and that the gateway’s power is turned on.
