SmartRG SR500n, User Manual, Page: 9 / 35

ZXDSL 831AII User Manual
- 9 -
Figure 2.2
2.3.4 VDSL MODEM WORK MODE CONFIGURATION
1
．
For different protocols, the users need to set VDSL Modem accordingly as listed below:
Table 2.2
PPPoE
PPPoA
ATM VC Protocol Use DNS User Name Password
√
PPPoE Enable
√ √
√
PPPoA Enable
√ √
1483 Bridged
Lower interface Default route
√
Disable
Note:
√
means configure according to VDSL service provider
’
s instructed value.
PPPoE can also be realized via third party dialup software.
User Manual
Reference Chapter
PPPoE PPPoA 1483 Bridged
3.3 3.3 3.2
2
．
After getting through every page for parameters set-up, click
“
Apply
”
to save the value in VDSL MODEM
3
．
Click the
“
Restore Default Settings
”
on
“
Management
”
Tab to enter the saving configuration page as
Figure 2.3. After the Modem reboot,The VDSL MODEM will work on the new parameters.