Automatic Shutdown and Removal
ROBO-KLEEN PLUS will automatically shut down after a work
cycle of approximately 3 hours. Should a second cleaning cycle
be required, switch off the power supply for at least 30 seconds
before restarting.
ALWAYS SWITCH OFF THE POWER SUPPLY BEFORE REMOVING
ROBO-KLEEN PLUS FROM THE POOL.
Remove ROBO-KLEEN PLUS from the water by gently pulling in
the cable. When ROBO-KLEEN PLUS reaches the surface, lift it out
by the handle - NOT by the cable. To minimize debris falling back
into the pool during removal, pull out of water and place upside
down on ledge.
Carefully reel in and coil the cable. Store ROBO-KLEEN PLUS in a
dry shaded place at a temperature between 40˚ F and 90˚ F.
6
Robo-Kleen PLUS Manual:Layout 1 7/17/09 5:53 PM Page 6
