INSTALLING THE PE23
Begin the installation by carefully unpacking the box and checking to ensure all parts are present. If any parts are missing contact
Smartpool Customer Service at 732 730 9880 for replacement parts. See the parts list below.
A.
Main Alarm Body.
B.
Alarm Mounting Plate.
C.
Remote Siren.
D.
AC Adapter for Remote Siren.
E.
Mounting screws for Main alarm Body.
F.
Mounting Anchors.
G.
Magnetic Key.
REQUIRED TOOLS
• Pencil
• Phillips head screwdriver
• 1/2” drill bit
• Electric Drill
• Adjustable wrench
• Masking tape
CHOOSING THE LOCATION TO INSTALL ALARM
The location of your alarm is critical to ensure that it performs to its optimum abilities. On the following page is a diagram
showing the most popular pool styles and their optimum mounting points on the pool. Decide which configuration is
closest to your pool and continue with the installation.
In configuration A the PE23 is effective on pools up to 16’ x32’ and should be placed at location 1 or 2.
In configuration B the PE23 should be installed at location 1 if the pool size is 26 feet (8M) or less. If the pool exceeds
26 feet (8M) then a second alarm is required. In this case, install the alarms at location 2 AND 3.
In configuration C the PE23 should be installed in pools 24 feet (8m) or less, at location 1. For pools larger than 24
feet, a second alarm should be added at location 2.
In configuration D the PE23 should be installed in pools 17 feet or less in location 1. For pools larger than 17 feet a
second alarm should be added to location 2.
In configuration E the PE23 should be installed in any of the 4 locations and a second unit should be installed if the
diameter is greater than 24 feet.
