Battery Installation
The pool side alarm transmitter is designed to be powered by a standard
9V alkaline battery and a standard 1.5V AA battery (both not
included).
After installing batteries, press the
?
button located at the front on the
control unit. The alarm will sound either one beep, or 5 consecutive
beeps. This will depend whether the unit is turned ON or OFF.
Low Battery Indicator
The unit has a built-in microprocessor which automatically monitors
the 9V battery level. When this battery is running low, it will sound a
chirping tone approximately once every 60 seconds. Simply replace
the 9V battery with a new one when this occurs.
The AA battery is used to power the temperature monitoring device.
When this battery is running low, the LCD display will flash. Simply
replace the AA battery with a new one when this occurs.
4