5
CARE AND MAINTENANCE
•
Keep water clean to prolong the life of the pump. Use of distilled water will reduce mineral deposits.
•
Regular cleaning of the pump may be necessary depending upon the environment in which it is
operated. Clean the pump when it is visibly soiled or when a drop in performance is detected.
•
Before cleaning, always disconnect the pump from the power source.
•
Remove all parts from the pump and clean in warm, soapy water.
•
Disassemble the pump housing and remove the impeller housing to expose the impeller assembly.
Remove the impeller assembly by gently pulling on the impeller blades. Use a soft cloth or brush
to clean the impeller assembly and the inside of the impeller housing.
TROUBLESHOOTING
If the pump fails to operate:
•
Check to make sure the power cord is plugged in and the pump is getting power.
•
Check the pump outlet and any tubing, fountains, spitters etc. for kinks or obstructions.
•
Remove the inlet screen and/or pump cover, and impeller housing to expose the impeller. Turn
the impeller to ensure that it is not broken or jammed.
If the performance of the pump is not satisfactory or the pump does not flow evenly:
•
Check to make sure the pump is completely submerged in water.
•
Check to make sure the impeller and the housing are clean.
•
Adjust flow control.
REPLACEMENT PARTS LIST
For replacement parts, call our customer service department
at 1-866-869-5300, 8 a.m.-6 p.m., EST, Monday-Friday.
Printed in China
Part
Description
B
Extension tube
C
Waterspray nozzle
D
Trumpet fountain head
E
Waterbell fountain head
F
PVC pond liner (7 ft. x 10 ft.)
G
Pump with light assembly
H
Filter block
I
Filter cover
J
Base plate
K
Lower fountain head nozzle
L
Adapter
M
Transformer
N
Flow control knob
O
Front cover
P
Impeller cover
Q
Impeller assembly
F
G
L
H
I
K
B
C
D
E
M
J
N
O
P
Q
