PLEASE CALL CUSTOMER CARE BEFORE RETURNING ITEM TO LOWE’S: 1-888-755-4497
EN
7
Step1
: Before cleaning,
always disconnect the pump
from the power source and
remove the pump cover.
Step 2
: Remove the impeller
cover to expose the impeller
assembly. Remove the
impeller assembly by gently
pulling on the impeller
blades. The impeller is held
in place by a magnet.
NOTE: #52469, Do not
remove the metal shaft from
inside the impeller housing.
Step 3
: Use a soft cloth or
brush and warm water to
clean the impeller and the in-
side of the impeller housing.
Step 4
: Reassemble all pump parts and place in water before
reconnecting to the power source.
Regular cleaning of the pump may be necessary depending upon
the environment which it is operated. Clean the pump when it is
visibly soiled or when a drop in performance is detected. Clean
pump in 4 easy steps!
PUMP
•
Cleaning should only be done with warm water and a soft
cloth or brush.
•
The frequency of cleaning depends upon the conditions of the
environment where the light is used.
