1. Please make sure the Bluetooth function of your devices in the status of
turn off before pairing. And if you paired the Hoop with your devices before,
please remove the pairing record on your devices first.
2. Keep your phone and the headset close to each other (3 feet apart).
3. With the headset off, press and hold the power button until the blue and
red indicator lights on the left ear cup flash alternately.
4. Turn on the Bluetooth on your device A, locate and tap SMARTOMI Hoop
on device A. Pairing is complete when the red and blue lights stop blinking
alternately, leaving only the blue light blinking.
5. Turn off the Bluetooth function on device A, then turn on the Bluetooth
function on device B, locate and tap SMARTOMI Hoop on device B. Pairing
is complete when the red and blue lights stop blinking alternately, leaving
only the blue light blinking.
6. Turn on the Bluetooth function on device A again, and tap SMARTOMI
Hoop on device A to complete the pairing with the device A, then multi-point
devices pairing will be done.
www.smartomi.com [email protected]
Multi-Point Devices Pairing
：
7
Function Introduction