Page
3
of
8
Contact operation
For contact operation, fold the stand on the underside of the device out
completely. Place the smartlux DIGITAL on the subject material which is to
be magnified.
Writing position
You can also use the smartlux DIGITAL for writing underneath it. To do this,
fold the stand out as far as the first snap-in position and position the device
vertically:
CHARGING THE INTERNAL BATTERY
Before using the smartlux DIGITAL for the first time, you need to
fully charge the internal battery!
To charge it, connect the cable from the mains adapter supplied to the
charging socket (9) on the smartlux DIGITAL. Now plug the mains adapter
into a suitable mains socket using the relevant mains plug type. Charging
takes about 2 hours. The charging indicator LED (10) will illuminate red
during the charging process. The charging check LED goes out once the
charging process is complete. When charging is complete, disconnect the
mains adapter from the plug and from the smartlux DIGITAL. You can use
the device during the charging process. This will extend the charging time.
The charging status of the internal battery is shown at the top screen border
when the device is switched on.
Battery completely charged
Capacity 75%
Capacity 50%
Residual capacity 25%, symbol is displayed in red at the top screen
border for 5 seconds
