background image

Change Setup code (Master) 

 

• Press and hold 8 until double beep, enter Setup code and select function 0. 
• Enter and confirm new Setup code. 

Install Service  

• Press and hold 8 until double beep, enter Setup code and select function 1. 
• Press OK to confirm the operation. 
• Enter and confirm new Service code. 

Delete Service  

• Press and hold 8 until double beep, enter Setup code and select function 3. 
• Press OK to confirm the operation. 

Reset lock  

• Press and hold 8 until double beep, enter Setup code and select function 5. 
• Display shows the message RESET.  
• Press OK to confirm the operation. 
• Enter a valid code. 
• Lock is in pre-setup mode. 

Pre-setup mode 

• To open press 1. 
• Setup code (Master) 5-5-5-5-5-5-5-5. 

Lock setup 

• Press and hold 8 until double beep. Enter the code 5-5-5-5-5-5-5-5. 
• Display shows the following options (press P to scroll):  

• CHANGE: change Setup code to exit pre-setup mode. 
• DATE TIME: set time and date before lock setup. 
• SETUP: check (OK) or change (P) lock configuration (

bold

 = default settings) 

DELAY DOWN 

 - DELAY UP: time delay counting up or down. 

DUAL NO

 - DUAL YES: dual mode active - dual mode not active. 

LOCKOUT MANAGER

 - LOCKOUT ALL: lockout set by Manager only or any valid code. 

DATE DD/MM

 - DATE MM/DD: date format European/American. 

DIGITS 6

 - DIGITS 7 - DIGITS 8: opening codes length.  

Date and time 

(check time at least once a year)

 

• Press and hold 8 until double beep, enter Setup code and select function 6 or press 

and hold 6 until double beep and enter Service code. 

• Display shows date and time menu: press OK. 
• Display shows current time: enter hh:mm:ss and press OK. 
• Display shows current date: enter dd/mm/yy and press OK.  

Check time and date 

• Press and hold OK until double beep: display shows the current language. 
• Press P: display shows serial number and firmware version. 
• Press P: display shows set time and date. 

Set time lock  

Make sure time and date have been properly set before setting time lock. 
• Press and hold 8 until double beep, enter Setup code and select function 6 or press 

and hold 6 until double beep and enter Service code: display shows date and time 
menu. 

• Press P: display shows time lock menu. 

 of   

2

3

FUNCTION 

0 1 3 5 

6

 7 9

DATE 

TIME

11:40 

11/12/18

TIME LOCK

FUNCTION 

0

 1 3 5 6 7 9

FUNCTION 

1

 3 5 6 7 9

FUNCTION 

0 1 3 

5

 6 7 9

FUNCTION 

0 1 

3

 5 6 7 9

FUNCTION 

0 1 3 5 

6

 7 9

RESET

Reviews: