background image

18 

 

 

 

 

“A division of Ness Corporation Pty Ltd” 

Ness  Corporation  manufacturing  processes  are  accredited  to  ISO9001  quality  standards  and  all  possible 
care  and  diligence  has  been  applied  during  manufacture  to  ensure  the  reliable  operation  of  this  product. 
However  there  are  various  external  factors  that  may  impede  or  restrict  the  operation  of  this  product  in 
accordance with the product’s specification.

 

 

To  the  best  of  our  knowledge,  the  information  contained  in  this  manual  is  correct  at  the  time  of  print. 
SmartLink 

“A  division  of  NESS  CORPORATION  PTY  LTD”  reserves  the  right  to  make  changes  to  the 

features and specifications at any time without prior notice in the course of product development. 

 

FCC Part 15.19 Warning Statement- 

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE 

FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) 

THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY 

CAUSE UNDESIRED OPERATION. 

FCC Part 15.21 Warning Statement- 

NOTE:   THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY 

APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE. SUCH MODIFICATIONS COULD VOID THE 

USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

 

IC RSS-GEN, Sec 8.4 Warning Statement- 

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the 

following two conditions: (1) this device may not cause interference, and (2) this device must accept any 

interference, including interference that may cause undesired operation of the device. 
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de 

licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de 

brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le 

brouillage est susceptible d'en compromettre le fonctionnement.

 

 

EQUIPMENT NAME: Vibrating Blue Pendant 
Model: TRMBV915 
 
FCC ID: O2K-TRM915 

CANADA IC: 2290B-TRM915

 

 
SmartLink “A division of Ness Corporation” 
www.smartlink.com.au 
 

USA Contact: 
Elk Products. 3266 US-70, Connelly Springs, NC 28612 
Tel: 828-397-4200 

 
© Ness Corporation Pty Ltd ABN 28 069 984 372 

 

 

 

Summary of Contents for TRMBV915



















Reviews: