Set-top box SmartLabs SML-5041W1. User Manual
Back Panel
Element
Purpose
DC 12V
The port for a power adapter
A/V
The analog audio/video interface (com stereo audio signal)
HDMI
The audio/video interface for connecting with an HDMI-compliant device
S/PDIF
Optical audio output to audio receiver or speakers (optional)
LAN
Ethernet port, 10/100 Mbps
USB
USB 2.0 port
Note: the device appearance may differ from that shown in the picture.
Installation
1.
Remove your STB from packaging.
2.
Make sure that the place, where you are installing the STB, meets the following requirements:
●
Place STB on a flat surface.
●
Do not place the STB on slick surfaces, where there is a risk of vibration, fall or other damages of STB.
●
Do not mount the STB on soft surfaces, like a bed, carpet, etc. Such a surface impedes access for air and
normal ventilation of the STB and thereby causes overheating and malfunctioning.
●
Do not cover the STB.
●
Do not shield the ventilation holes in the STB’s enclosure located at the top panel of the STB.
●
When mounting the STB, make sure that there is at least 10 cm of free space at each side of the device.
Do not place STB in closed cupboards and caves.
●
Install and operate the STB with a minimum distance of 20 cm (7.8 inches) between the device and the
body.
●
Do not place STB on surfaces, which can heat, for instance, on boosters.
●
Do not place any things on the device.
●
To avoid damage to the power adapter cable, place the cable so that it is not pressed, pinched or
mechanically affected in any way.
3.
Make sure that the TV set and the STB are not connected to the power network.
4.
Connect the TV set and the STB with the HDMI cable.
5.
Connect the Ethernet cable to the STB. If you are going to use the Wi-Fi connection, skip this step.
6.
Connect the STB and the TV set to the power network.
–
5
–