HDMI
The audio/video interface for connecting with an HDMI-compliant
device
LAN
Ethernet port, 10/100 Mbps
USB
USB 2.0 port
Connecting
Installation
1.Remove your STB from packaging.
2.Make sure that the place, where you are installing the STB, meets the following
requirements:
Place STB on a flat surface.
Do not place the STB on slick surfaces, where there is a risk of vibration, fall
or other damages of STB.
Do not mount the STB on soft surfaces, like a bed, carpet, etc. Such a
surface impedes access for air and normal ventilation of the STB and thereby
causes overheating and malfunctioning.
Do not cover the STB.
Do not shield the ventilation holes in the STB’s enclosure located at the top
panel of the STB.
When mounting the STB, make sure that there are at least 10 cm of free
space at each side of the device. Do not place STB in closed cupboards and
caves.
Install and operate the STB with a minimum distance of 20 cm (7.8 inches)
between the device and the body.
Do not place STB on surfaces, which can heat, for instance, on boosters.
Do not place any things on the device.
To avoid damage of the power adapter’s cable, place the cable so that it is
not pressed, pinched or mechanically affected in any way.
3.Make sure that the TV set and the STB are not connected to the power network.
Connect the TV set and the STB with the HDMI cable.
Power
adapter
TV
Router
USB
Summary of Contents for SML-5041W
Page 1: ...SML 5041W User manual...