Installation of Batteries to the Remote Control
Two batteries of the AAA type are used in IR and RF Remote Control. Put the
batteries into Remote Control like it is shown in the picture:
•
Remove the cover from the batteries’ compartment.
•
Insert batteries keeping the correct polarity.
•
Close the batteries’ compartment cover.
When inserting or replacing batteries in Remote Control, keep the following
conditions:
1. Strictly keep the batteries’ polarity.
2. Do not use old and new batteries at the same time.
3. Do not try to charge batteries.
4. Insert both batteries of the same manufacturer and model.
Connecting the RF Remote Control
If your device is equipped with the RF Remote Control, you should connect it
to the IPTV STB, which you are going to control with the Remote Control. To
connect the RF Remote Control, do the following:
1. Insert the batteries into the Remote Control.
2. Put the Remote Control close to the IPTV STB no farther than at 20 cm
from the device.
3. Press the
Favorites
and
>>|
buttons simultaneously.
4. If the Remote Control’s led indicator lights up and lights permanently, the
Remote Control has been successfully connected to the IPTV STB and
the RF Remote Control is ready to use.
If the indicator blinks, repeat steps 2, 3, 4.
If the indicator does not light up, make sure that you have installed the
working batteries properly and repeat steps 2, 3, 4.
14
