Smartinterface Lunette Instructions Manual Download Page 18

19

Rev.

 2.0.1

www.smartinterface.de  ·  [email protected]

WEEE-Reg.-Nr. DE82497460

Technisches Büro Kühnhold

Ehestorfer Weg 155

21075 Hamburg  · Germany

http://www.smartinterface.de  ·  [email protected]

All images and text in this instruction manual, as well as the instruction 

manual itself are copyright protected, any further use must be appro-

ved in writing by www.smartinterface.de.

All brands and trademarks specified within the description and, where 

applicable, protected by a third party are subject without restriction to 

the terms and conditions of the respectively valid right to use a symbol 

and the ownership rights of each registered owner. The mere mention 

thereof shall not be construed to represent that the trademarks are 

not protected by third party rights! The brand names and trademarks 

used in this documentation are the property of the respective rights 

owners and are used here only for descriptive purposes.

Opening the dive computer and replacing the battery shall be at your 

own risk! No liability shall be assumed for lack of waterproofness or 

damage.

European Union – Disposal information: This symbol indicates that this 

product must be disposed of pursuant the valid legal provisions and 

separated from domestic waste.

Bring this product to an official collection point for disposal. Products 

can be brought to some collection points for disposal free of charge. 

Separate collection and recycling conserves raw material reserves and 

ensures compliance with all regulations for the protection of health 

and the environment when recycling the product.

Publisher

Copyright

Copyright and labeling

Disclaimer

Recycling

Summary of Contents for Lunette



















Reviews: