6
INSTALLATION AND WIRING DIAGRAMS:
INSTALLATIONS:
Step 1: Audio Connection
Connect line level audio devices such as MP3, CD, DVD, notebook…etc., to the unit using the RCA L/R, stereo 3.5mm or
MIC input. This device is also equipped with a Bluetooth receiver that will allow you to connect a wireless audio source
from Bluetooth-enabled devices.
Notes:
The wireless audio input is in parallel with dual-RCA input; if both signals are present at the same time then two sources
will be mixed together.
Step 2: Speaker Connection
4 connectors for 14~22 AWG cable (R+, R-, L+, L-).
Step 3: Power Connection
Connect the provided power supply to the 24V input on the unit, and then plug in the power supply to an available outlet.
Note:
Minimum power requirement of 24V at current rating 2.5A – use of an alternative power supply that does not meet
the minimum recommendations may cause power supply failure or shutdown due to overheating or power overload.
Step 4: IR receiver connection
Plug in the IR Receiver to the IR input jack – this will give you remote control of source selection, volume control up and
down, treble and bass up and down, and more, all using the Remote Control.
OPERATIONS:
Press “Mute” button (LED will disappear) to put the receiver into “WORKING MODE”
It is suggested to play your audio source with the volume set a half and then increase the volume to a desirable level.
Procedures of pairing your Bluetooth device:
•
Switch source to input 1
•
Place your Bluetooth device within 1m of this unit
•
Perform pairing procedure from your Bluetooth device to detect the unit - the ID name of “Audio adapter XXXX” will
appear on the list of your Bluetooth device. If not, switch to a different source and then go back to the Bluetooth
source input, this will reset the Bluetooth function, and then repeat the pairing operation.
•
Select “Audio adapter XXXX” on the display of the Bluetooth
device
•
Input passkey/pin code “0000” (required for first time connection from a Bluetooth device)
•
Start the Bluetooth connection from the Bluetooth device
Note: The wireless receiver is capable of storing up to 8 pairings. Additionally, it is able to automatically reconnect to the
last paired device
