14
The following procedure is required on most typical systems (Note: your
PC may require a different procedure. Please refer to your PCs
documentation for how to adjust the refresh rate for further information):
Start Menu -> Settings -> Control Panel
Click on the icon "DISPLAY".
Click on SETTINGS tab.
Click on the button "ADVANCED".
Click on ADAPTER tab.
Change the Refresh Rate from Optimal to ADAPTER DEFAULT or 60Hz
and click apply.
If you do not see REFRESH RATE under the ADAPTER tab, click on the
MONITOR tab and be sure that the monitor type is set to:
Desktop users
: Super VGA 1024x768 (or desired maximum resolution)
Laptop users
: Laptop Display Panel 1024x768 (or equivalent for your
system)
Q & A
Q: How can I enhance the display quality?
A: You can usually decrease the TV contrast and increase brightness
control to get the better picture.
Q: I connect using a NOTEBOOK PC, but no output is displayed on TV.
A:
To get a converted image on the TV, you must configure the
laptop computer to display an external VGA signal.
Typically, this is done by toggling the "Fn" key + "F1", "F2", etc.
The actual function key varies with each computer.
Please refer to your computer's User's Manual for specific
instructions for displaying an external VGA signal.
SMARTHOME™ 1-800-SMART-HOME 949-221-9200 http://www.smarthome.com Order 7743