18 •
ENGLISH
MEMORY FUNCTIONS
Recalling Measurements in Memory
This monitor stores and recalls up to 99 measurements, plus
an average of the last three measurements in each memory
bank / per user.
Select the user to review; see page 10 for instructions on how
to change the User.
All results will be announced aloud in the selected memory
bank if the voice feature is On.
1. Press and release the
M
button. The unit will
fi
rst display
the average of the last three measurements, Fig 1.
2. Press the
M
button again to begin scrolling through the
saved measurements. Measurements will appear on the
display from most current to oldest; the memory number
will appear on the lower right corner of the display, Fig 2.
Press M again to proceed to the result, Fig 3.
3. Press the
START/STOP
button to turn the unit off.
Clearing Measurements from Memory
Memory for a speci
fi
c bank may be entirely deleted while in
Memory Recall mode.
1. Press and hold the
SET
button for approximately 3
seconds to delete all memory records from the selected
group with voice broadcast “Memory Clear” and then
transfer into testing mode, Fig. 3.
2. Press the
START/STOP
button to turn the unit off.
NOTE:
Memory can not be recovered once it has been
deleted.
Fig. 1
mmHg
M
D
AVG
Fig. 2
M
D
No
Fig. 3
mmHg
M
D
