SmartGyro CROSSOVER DUAL X2, User Manual

Page: 39 / 134

Charge connection:
Remove the rubber cap, insert the charging cable. After
loading, put the rubber cover back in place.
Charging your smartGyro
Make sure your smartGyro's charger is in optimal condition. Check that
there is no dust or dirt on the connector and if so, clean it and make sure
it is dry.
Always use the original charger provided with the product and connect it
correctly to the device (through the charging port) and to a power outlet.
It is important that you always use the charger that comes with your
smartGyro, otherwise, it may cause the device to fail and not be covered
by the warranty. Once the product has been loaded, it will take approxi-
mately two or three hours to complete the charge.
Cuando la luz LED cambia a color verde, significa que el producto está
completamente cargado.
smartgyro.es
37
English
Speedway - User Manual