HWP30N/HWP40N Forced Circulation Heater User Manual Page 10 of 14
5.5
OPERATION PANEL
Fig.3 Operation Panel Drawing
5.6
OPERATION DESCRIPTION
5.6.1
PARAMETER CHECK
Press
and
to switchover digital cube display and do value adjustment.
5.6.2
COMMISSIONING
If water temperature is above pre-set reset temperature, press
and heater will enter
commissioning status, and it will transfer to auto status after heating for 10s.
5.6.3
PARAMETER
SETTING
Press
and enter parameter setting menu, and it will display
(H means the
set temperature is cut-off temperature value, 40ºC is only an example). Press
again to enter the
setting, and adjust values by
and
. Press
again to move or confirm. Press
and it will go back to the main menu. It will also return back to first page if there is no operation within 1
minute.
