1-10
•
Choose a tight fitting helmet to help reduce light reflection into the helmet
through the space between the shell and the head.
•
Wear the helmet correctly. Do not use it as a hand shield.
•
Protect the shade lens from impact and sudden temperature changes that
could cause it to crack.
•
Use a cover lens to protect the filter shade lens. Replace the cover lens if it
gets scratched or hazy.
•
Make sure to replace the gasket periodically if your helmet uses one.
•
Replace the clear retaining lens to protect your eyes from broken pieces.
•
Clean lenses periodically.
•
Discard pitted or damaged lenses.
The correct filter shade is selected according to the welding process, wire
diameter, and operating current. The table on the following page gives the
correct shade numbers for different situations.
•
ALWAYS use suggested shade numbers instead of minimum shades.
•
Provide additional task lighting that suits welders' needs.
•
ALWAYS use the same shade as the welder's if you are directly observing
the welding arc.
Summary of Contents for ARC-100S
