NB40LP1
REV 01 – Nov. 2018 - ENGLISH
MAINTENANCE
We recommend replacing the smoke capsule every 5
years using only the original replacement.
WARRANTY
SMARTEK s.r.l. It guarantees its products against all
manufacturing defects for a period of 30 months from the
production date shown on the label.
RECOMMENDATIONS
Before leaving, ventilate the rooms thoroughly after the
smoke has been delivered.
TECHNICAL SPECIFICATIONS
Power supply
3,6V lithium battery AA
size such as SAFT
LS14500 or similar
Minimum operating voltage
2,2V
Battery low output threshold
2,6V
Autonomy
About 10 years
Size
12cm x 17cm x 14cm
Saturable volume
100m
3
Weight
760g
Smoke average delivery time
25sec
Operating temperature
From 0°C to +45°C
Storage temperature
From -20°C to +55°C
Maximum relative humidity
70%
Inputs
SI – System state
ALL – Alarm
CSI – Immediate action
Outputs
24H – Tamper
ALL – Alarm
BL – Battery low
ADVANCED WIRING
The inputs interface mode can be programmed using the
DIP switches SW1, SW2, SW3 and SW4 as previously
explained.
The inputs can be controlled not only with clean contacts
but also with open collector or push-pull outputs. The
image below shows a typical NPN or PNP interface.
For any kind of interface, the inputs voltage thresholds are
the followed:
Min V
Max V
Level 0
GND
0,5V
Level 1
1,9V
+Vbatt
WORKING DIAGRAM
