- 11 -
Figure 9
3. DHCP service enables you to assign IP address automatically for cameras which are in IP
address automatic acquisition mode, touch
‘
DHCP
’
icon to enter the DHCP operation interface.
4. NET-port Blink function: Connect one end of the cable to LAN port, touch ‘Start’ button
then you can see the port on network device blink regularly, it’s easy to find the other end of a
cable by this function.
5. For other network tools, please touch the corresponding icon to use.
2.7. RS485 serial tool
RS485 tool can accept, send and analyze RS485 port data. It can be used to analyze PTZ
protocols. Touch ‘Series’ icon to enter the serial port function interface, you can set Baud rate,
Data bit, Parity bit and Stop bit, you can set the data type to character or HEX to display and send.
Touch ‘Clr Recv’ or ‘Clr Send’ to clear the screen, as shown in Figure 10
Operation Instructions:
1. Connect RS485 cable to RS485 port, crocodile clamp to device, be careful the port
has positive and negative distinction, do not connect incorrectly.
2. Touch ‘Serial’ icon to enter App to test
