USER’S MANUAL PAGE 3
JSL-950
7. Use the unit for jumpstarting a 12V LEAD-ACID battery only. Do NOT
attempt to jump-start a vehicle with a non-rechargeable or defective
battery.
8. Working in vicinity of a lead-acid battery is dangerous. Batteries
generate explosive gases during normal operation. Use in
well-ventilated area. Battery acid can cause permanent blindness. Avoid
touching eyes while working near battery.
9. To avoid damage to the vehicle’s electrical system, do NOT use the unit
on a vehicle that has no battery installed.
10. Use of an accessory not recommended or sold by the manufacturer or
retailer may result in a risk of fire, electric shock or injury to persons. Do
NOT operate with damaged accessory(s).
11. Locate the unit as far away from battery as jumper cables permit.
12. Do NOT expose to rain or wet conditions.
13. To reduce the risk of damage to electric plug and cord, pull by the plug
rather than the cord when disconnecting.
14. Operate with caution if the jump starter has received direct hit of force or
been dropped. Have it checked and repaired if damaged.
15. Any repair must be carried out by the manufacturer or an authorized
repair agent in order to avoid danger.
16. To prevent arcing, never allow the clamps to touch together or to touch
the same piece of metal.
17. Ensure that the jumper clamps are securely clipped on the storage hold-
ers when unit is not used for jumpstarting.
18.
WARNING: RISK OF ELECTRIC SHOCK!
Incorrect operation of this
product may result in damage and personal injury. The output of this
product is 120V AC and can shock or electrocute the same as any
ordinary household AC wall outlet.
