USER’S MANUAL PAGE 4
BC-15000
USER’S MANUAL PAGE 5
BC-15000
CHARGER TECHNICAL SPECIFICATIONS
CONNECTING TO THE BATTERY
AC Input
100-120VAC, 50-60Hz, 3.5A, 350W Max
DC Output
6VDC, 5A
12VDC, 15A
12VDC, 20A (5 minutes)
Temperature Controlled
Charger Type
8 step, Fully automatic charging cycle
Start Voltage
> 1V
Housing Protection
IP33
1. Plug the charger into a 120V AC outlet. Connect the charger outlet cord
plug to the cord plug of the clamp connectors or power port adapter.
2. Identify polarity of battery posts. The positive battery terminal is typically
marked by these letters or symbol (POS,P,+). The negative battery
terminal is typically marked by these letters or symbol (NEG,N,-).
3. Do not make any connections to the carburetor, fuel lines, or thin metal
parts.
4. Identify if you have a negative or positive grounded vehicle. This can be
done by identifying which battery post (NEG or POS) is connected to
the chassis.
5. For a negative grounded vehicle (most common): connect the RED
POSITIVE clamp first to the positive battery terminal, then connect the
BLACK NEGATIVE clamp to the negative battery terminal or vehicle
chassis.
6. For a positive grounded vehicle (very uncommon): connect the BLACK
NEGATIVE clamp first to the negative battery terminal, then connect the
RED POSITIVE clamp to the positive battery terminal or vehicle chassis.
7. When disconnecting, disconnect in the reverse sequence, removing the
negative first (or positive first for positive ground systems).
8. Follow these steps when using the 12V adapter: Keep the vehicle hood
open. Connect the end of the 12V adapter plug to the charger; insert
• This charger is designed for all types of 12V Lead-acid and 12V Lithium-
ion batteries, including WET (Flooded), GEL, MF (Maintenance-Free),
EFB (Enhanced Flooded Battery), AGM (Absorbed Glass Mat) and Li-
ION (Lithium Ion) batteries.
• Built-in intelligent microprocessor makes charging faster, easier and
safer.
• This charger has safety features, including spark proof, protection for
reverse polarity, short circuit, overcurrent, overcharge and overheat.
• The charger has auto-memory, which returns to last selected charging
mode when restarted (except Li-ION, SUPPLY and BOOST CHARGE
modes).
• When battery level indicator turns to 100% solid Green LED, it will
automatically switch from full charge to maintenance status to maintain
batteries during prolonged periods of storage without overcharging or
damaging the battery.
• The charger has four external holes for mounting. Mount the charger in a
desired location with the supplied self-threading screws. It is important to
keep in mind the distance to the battery.
CHARGER FEATURES
Battery Type
All Types of 6V and 12V Lead-acid Batteries,
and 12V Lithium Ion Batteries
Battery Capacity
14-150Ah (6V), 50-400Ah (12V),
Maintains all battery sizes
Accessories Included
Clamp Connectors, 12V Power Port Adapter,
12V SUPPLY Power Port Adapter, Screws
Ambient Temperature
32˚F – 104˚F (0˚C – 40˚C)
