15%-30%
Fuel
Notice before assembly
The following tools are needed for assembly. You must buy them from the local hobby
shops apart from the kits we provided.
Please read and comprehend this instruction manual before assembly.
Tools needed for assembly
Hexagonal wrenches
Scissor
Hobby knife
Cross sleeve
Super
glue
Slide cutter Needle
nose pliers Cross screw
driver (No.2)
Cross screw
driver (No.1)
Charger
Igniter
Additional items needed to buy for
running in the engine
Diff. oil
Fuel
bumper
Air filter oil Shock
absorber oil
Battery
Switch
Receiver
Steering servo
Throttle servo
2-Channel Transmitter system
Please read the transmitter system instructions carefully before use.
The servo must be set at the center position before installation. To set the servo to neutral
position, turn on the transmitter and receiver, and set the servo rod at the center position,
then turn off the receiver and the transmitter in succession. The servo will be at the
proper position.
Transmitter
Type:30113
Stop
Half forward
Full forward
Battery cover
Speed control trigger
"AA" battery
or Ni-cd(*8)
Left Right
Power switch
Antenna
Steering adjuster
Speed control adjuster
01
Steering control wheel
2mm
2.5mm
1.5mm