3. IR Remote Controller
The function buttons of the IR Remote Controller are as below.
No.
Functions
1 Power
Button
2 ID Selection Button
3 Numeric
Button
4 PTZ
Button
5
Preset Button on PTZ Mode
6
Focus Button on PTZ Mode
7
Zoom (In & out) Button on PTZ Mode
8
Preset Tour Button on PTZ Mode
9 Direction Button (Left/Right/Up/Down)
10 Enter (Selection) Button
11 Menu
Button
12 Return
Button
13
Playback Button on Search Mode
(Fast Backward/Playback/Stop/Fast Forward)
14 Search
Button
15 Instant (Emergency) Recording Button
16 Auto-Sequence Button on Live Display Mode
17 Screen Mode Button
18 Backup
Button
Note
To use the IR Remote Controller, set the initial ID to be same as the ID in the DVR in the menu of ;
SYSTEM > SYSTEM INFO > REMOTE ID. (Default ID # for DVR and IR Remote Controller is “0”)
All DVR(s) have same default ID when it is out from the factory. Therefore, when the default value is used, one
IR Remote Controller can control several DVR(s) at once. To prevent this, it is recommended to set different ID
between DVR and IR Remote Controller.
Procedure
How to setup the ID in IR Remote Controller
1) Keep pressing ID selection button marked as “#” for about 5 seconds.
2) Set the ID number by pressing numeric button on IR Remote Controller.
- ID number is available from 000 up to 255.
- You have to press numeric button as three-digit number format.
- For example, press “000” for 0, “023” for 23, “234” for 234.
1
2
7
4
8
5
3
6
9
11
12
13
14
15
16
17
18
10
