Smartec STC 2008 User Manual Download Page 3

l

This product can be used under diverse operating conditions. Determination of
applicability of equipment or devices concerned shall be determined after
analysis or testing as necessary by the designer of such equipment or devices, or
personnel related to the specifications. Such designer or personnel shall assure
the performance and safety of the equipment or devices.

l

This product is not designed or manufactured to be used for control of
equipment directly concerned with human life (*1) or equipment relating to
maintenance of public services/functions involving factors of safety (*2).
Therefore, the product shall not be used for such applications.

(*1): Equipment directly concerned with human life refers to:

l

Medical equipment such as life-support systems, equipment for operating

theaters.

l

Exhaust control equipment for exhaust gases such as toxic fumes or smoke.

l

Equipment mandatory to be installed by various laws and regulations such as

the Fire Act or Building Standard Law.

l

Equipment related to the above.

(*2): Equipment relating to maintenance of public services/functions
 involving factors of safety refers to:

l

Equipment for nuclear power generation.

l

Equipment related to the above.

Outline

The STC-2008/1 utilizes Pixim's Digital Pixel System ® (DPS) for enterprise
security and embedded cameras based on 1/3 type WDR (Wide Dynamic Range)
sensor. The STC-2008/1 provides dramatically higher dynamic range image than
the charge-coupled devices (CCDs) or CMOS active pixel Sensors (APS) typically
used in similar video camera applications. The enhanced imaging capabilities of
DPS are based on a multi-sampling of image capture process. An analog-to-digital
converter (ADC) is designed into each pixel, and is operated simultaneously with
all other ADCs in every pixel of the sensor.

Futures

l

Wide dynamic range of 120dB (maximum)

l

TV system: NTSC/PAL (It switches by OSD)

l

1/3 type , 520 TV Lines, Vertical 460 TM lines (540 HTV line Equivalent).

l

Minimum illumination of 0.03 lx

l

The setting can be freely done with the OSD switch.

l

Compact and Lightweight: 42x42x86.5mm approx 200g

l

VBS, Y/C output

Summary of Contents for STC 2008














Reviews: