Electric charging station WBSH1-7
User manual and data sheet
7
Circuit
Input circuit terminals
L1 – N – PE
Charging method
3 modes
Charge control
Light indicators
4 LEDs (Indicate four states: power, charge, fault and network)
Communication interface
•
Ethernet (RJ-45 interface)
•
Wi-Fi (2.4 GHz)
•
ModBus (RS-485 interface)
Communication protocol
OCPP 1.6
RCD inside
Type B
Safety protections
Overvoltage, over temperature, overcurrent and earth protection.
Assembly
Wall mounting
Charging connector
IEC 62196-2, Tipo 2
Length of the charging cable
5m (Standard configuration)
Dimensions
309 mm x 215 mm x 114 mm
Weight
≤ 8Kg
Color and material
Front panel:
White, Polycarbonate (PC)
Back cover:
Gray, Polycarbonate (PC)
IP code
IP65
Altitude
≤ 2000m
Storage temperature
- 40 ~ 75°C
Operating temperature
- 30 ~ 55°C
Relative humidity
< 95% (not condensed)
Vibration
< 0,5 G
Place of installation
You can install the device indoors and outdoors with good ventilation.
ATTENTION!
Make sure that there are no flammable substances present on
the installation site.
NOTE!
On the right side of the charging station there is a plate specifying the model and all the basic technical
specifications.
