MyOT interface/actuator for OpenTherm Boilers
User manual
6
2 flashing every 3 seconds
The MyOT device is working and there is
no request for heating.
LED on and with 2 shutdowns every 3
seconds
The MyOT device is working and there is a
request for heating.
The flashing red LED indicates anomalies:
2 f pause
No communication on the OpenTherm bus.
3 f pause
Radio transmission issues on the Sigfox
module.
4 f pause
No communication on the MODBUS (if
enable).
5 f pause
No Wi-Fi connection and/or Internet
communication.
Wi-Fi Error. Possible causes:
•
No connection to the local network.
•
No connection to the SmartDHOME server (no Internet connection, server
temporarily unavailable, etc).
Wi-Fi Configuration
WARNING!
The device has several communication modes that cannot be configured at the
same time. Choose the one you prefer before proceeding with configuration.
WI-FI Configuration using application (recommended)
To configure the device, download and install the IoB application on your smartphone. After
that, set the MyOT in programming mode, turn on the device and press the functions button
for 3 seconds.
Upon release of the button, the device will enter configuration mode and the LEDs will flash
alternately (red and green). In this way, you will can connect to a new Wi-Fi called “IoB” to
begin the device configuration.
