1. Open the Filter Cover using the PUSH Button on the rear of the product.
2. Pull out the Filter Cap.
3. Take out the filter using two hands.
4. Remove the plastic wrap of the new filter then place it in the device.
5. Slide the Filter Cap on top of the filter until it clicks so the filter is tightly fixed. **Very important**
6. Close the Filter Cover then hook the Steam Cover bleow the steam vent as shown in the picture below.
1. Fill water half way up to the receptacle.
2. Close the Lid, lock the slide, press the Cleansing Button to start the process.
3. Cleansing will continue for 60 minutes. The product will narrate itself "Receptacle cleansing complete"
when operation is completed. *If the product is on mute, it will not narrate itself.
1. Food wastes can be stored in the receptacle. While being stored, the volume will slowly decrease
without causing bad odor.
2. Depending on the food type and weather, it can be stored up to 6 days.
3. Storage function will run only if the product is properly connected to power and if the Lid slide is
locked.
4. Power Button's lamp will be on lightly to show that the product is on Storage Mode.
Changing the filter
!
Using the Cleansing function
Cleansing is recommended once every other week.
Smart CARA's receptacles do not have to be cleaned after every operation since it uses very high
heat which will automatically eliminate bacteria. If inappropriate firm object are stuck in the recep
-
tacle, the cleansing function will help clean the receptacle more easily.
!
About the Storage funcion
What is the power consumption of the product?
Approximately 2.0kwh of power is consumed per 4 liters of food waste.
(Actual consumption may vary depending on the country)
!
