Page 28 of 80
i n t e l l i g e n t w i r e l e s s p l a t f o r m
airHaul™ Nexus User Guide
2.6.2 Wireless Configurations
The wireless parameters need to be configured for the Root Bridge device to communicate with other
airHaul Remotes.
Follow the steps below to change the Root Bridge Wireless Configurations:
1. From
the
Summary Information
page, click on the
Wireless Configuration
link.
2. The
Radio Configuration
page will appear, click on the
Wireless Settings
link.
3. Enter
the
SSID
of the unit and select the channel.
4. Enter the Remote unit radio’s MAC address in the
Client Authorization MAC
and designate
it as a Bridge or Router. The
Client Authorization MAC
setting is an ACL and it allows the
root device to filter client MAC for association.
5. Select the Transmit power of the radio from
Dial-in-Power
drop down menu.
6. Select the gain of the antenna from the drop down menu as per the gain of the antenna being
used with the equipment.
7. Enter the RF cable loss based on the cable specifications.
8. Click on the
Apply Changes
button to change the settings.
Figure 2-15 Root Bridge Wireless Settings
