Environment control
Infrared
Infrared environment control can be trained to work with most household devices that have an infrared remote control. This
typically includes TVs and video systems, music centres and much more.
To create a cell in Grid 3 that can control an infrared accessory, we advise you refer to the software manual. However, to
make a simple cell to complete this action:
1. Enter ‘Edit mode’ then double click on the cell you want to control the signal.
2. Choose Enviroment control from the Create cell menu.
3. Choose the type of accessory you would like to control, then select the Action. Click Ok to create the cell.
4. Under the Command menu select learn and follow the on screen instructions. Note if you are asked to configure
the transmitter, choose GEWA.
See the diagram for the location of the infrared learning window on the Grid Pad devices.
Safety note
This unit is designed for environment control. For safety critical functions, such as to call for help or to open the door to
leave the building in an emergency, or for any other function on which your safety depends, you should consider the use of a
simple environment control transmitter, such as the GEWA Prog, or a single action controller as a backup.
Infrared transmitters
Infrared learning window
16