SmartBidet SB-100R User Manual Download Page 3

4

5

    

1

   IMPORTANT SAFEGUARDS

    

2

   Cautions Before Installation

 READ ALL INSTRUCTIONS BEFORE INSTALLATION AND USE

DANGER

 - To reduce the risk of electrocution:

WARNING

 - To reduce the risk of burns, electrocution, fire, or injury to persons.

1. Do not place or store product where it can fall or be pulled into a tub or sink.
2. Do not place in or drop into water or other liquid.
3. Do not reach for a product that has fallen into water.
  If this happens unplug the unit and then remove item from water immediately.

1. Close supervision is necessary when this product is used by, on, or near children or invalids.
2. Use this product only for its intended use as described in this manual.
  Do not use attachments not recommended by the manufacturer.
3. Never operate this product if it has a damaged cord or plug or if it is not working properly,
  if it has been dropped or damaged, or dropped into water. Return the product to a service center for
  examination and repair.
4. Keep the cord away from heated surfaces.
5. Never block the air openings of the product or place it on a soft surface, such as a bed or couch,
  where the air openings may be blocked. Keep the air openings free of lint, hair, and the like.
6. Do not use the unit if you are sleeping or tired to the point of being drowsy.
7. Never drop or insert any object into any opening or hose.
8. Do not use outdoors or operate where aerosol (spray) products are being used or when oxidated products
  are being administered.
9. Unplug this product before filling. Fill (reservoir) with water. Do not overfill (or specify filling instructions)

SAVE THESE INSTRUCTIONS

 

THIS PRODUCT MUST BE PLUGGED into a regular voltage Grounded GFCI outlet (North America

 

120V AC, 60Hz). The rated power consumption is 660W / 600-700W. In locations where only a

 

standard two-prong outlet is available, it is the responsibility of the user to install a grounded

 

three-prong outlet. Using higher voltage is dangerous and may result in a fire or other accident.

 

This product is not responsible for damage resulting from the use of it on other than specified

 

voltage, or operating it without proper grounding.

 

• Instruction and caution statements for cleaning, user maintenance, operations recommended by the manufacturer,

 

  such as lubrication or nonlubrication, and a warning to the user that any other servicing should be performed by

 

  an authorized service representative or that the product has no user serviceable parts.

 

This product has to be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by

 

providing an escape wire for the electric current. This product is equipped with a cord having a grounding wire with a

 

grounding plug. The plug must be plugged into an outlet that is properly installed and grounded.

 

Danger - Improper use of the grounding plug can result in a risk of electric shock.

 

If repair or replacement of the cord or plug is necessary, do not connect the grounding wire to either flat blade terminal.

 

Consult with a licensed electrician if you have concerns about whether the product is properly grounded.

 
 

This product is for use on a normal 120 V circuit, and has a grounding plug that looks like the plug illustrated in sketch A

 

in Figure 1. A temporary adapter, which looks like the adapter illustrated in sketches B and C, may be used to connect this

 

plug to a 2-pole receptacle as shown in sketch B if a properly grounded outlet is not available. The temporary adapter

 

should be plugged into a properly grounded outlet (sketch A) and should be installed by a licensed electrician.

 

The green colored rigid ear, lug, and the ike extending from the adapter must be connected to a permanent ground such

 

as a properly grounded outlet box cover.

 

Whenever the adapter is used, it must be held in place by the screw.

      WIRING REQUIREMENT

      WIRING REQUIREMENT

     GROUND INSTRUCTIONS

WARNING

DANGER

This Product must be on a separated circuit. No other appliance should share
the circuit with this product.
Sharing a circuit could cause the branch circuit fuse to blow
or the circuit breaker to trip. Continuous usage under these conditions may
result in fire or property damage.

IMPROPER GROUNDING CAN RESULT IN A RISK OF ELECTRIC SHOCK.
Electric wiring has to be done in accordance with all local codes,
or in the absence of local codes, with National Electrical Codes.

GROUNDING PIN

ADAPTER

ADAPTER

METAL SCREW

TAB for
Grounding Screw

GROUNDED
OUTLET

- Figure 1-

GROUNDED
OUTLET BOX

Preferred Connection

Temporary Connection

The use of an extension cord is not recommended or advised. If it is necessary to use an extension cord, use only a three-prong 
extension cord (one to one), and a three slot built-in GFCI receptacle that will accept the plug on this product. The marked rating 
of the extension cord should be equal to or greater than the electrical rating of the unit (10amp). Consult a licensed electrician if 
you are not sure whether the unit is properly grounded.

This appliance has to be grounded.

Summary of Contents for SB-100R














Reviews: