8 Port DVI-I Audio Video Switch with Serial Control
6
Installation (continued)
EDID Learn:
The switch is designed to learn the connected monitor’s EDID upon power up. In the event of
connecting a new monitor to the switch, a power recycle is required.
The switch will indicate to the user the EDID learn process by flashing the front panel’s LEDs. Port
one green will begin to flash for about 10 seconds. When the LEDs stop flashing, the EDID learn
process is done.
The monitor must be connected to the video output connector located in the console space at the
back of the switch during the EDID learn process.
If the read EDID from the connected monitor is identical to the current stored EDID in the switch
then the EDID learn function will be skipped.
When learning the EDID, the audio will be disable until executing the channel switch or audio
switch commands via RS-232 or Front Panel. Rebooting power to the switch will also restore the
audio.
