Smart2Ergo AGILE 1.2, Manual, Page: 2 / 12

Customers please note that a product improvement has resulted
in a slight design change to the feet of this unit. This change
means that, in Step 6, the screws in the fixing pack labelled “E”
have been replaced by 8 longer screws in the red bag found in
the “Metal Work Box”.
Best Regards,
The Smart2Ergo Team
1. Keep Hands clear of moving parts during
operation and always visually inspect the area
before adjusting the desk to avoid accidents
and damage to property.
WARNING!
Pinch point. Keep hands clear
during operation.
IMPORTANT SAFETY INFORMATION
2. Make sure no obstacles are in the desks
movement path and all the cords connected
to the desk are the appropriate length to
accommodate the change in height.
3. Keep children away from the desks electrical
components and ensure children are
supervised while using the desk.
4. Keep all electrical components away from
liquids.
5. Do NOT sit or stand on the desk frame or go
under the desk when in motion.
6. Do NOT place any objects taller than 550mm
under the desk.
7. Do not open or tamper with any of the
electrical components (Legs, Control panel,
Control Box and Power cable).
Height adjustable desks have electronic motors and control gear and are
designed for use in dry work areas ONLY.
www.smart2ergo.com