Change Pad Indicator
Check
Pad
Low
Battery
Monitor Status
Active When Blinking
Pad and Monitor
Reset
Quick Start Instructions
Need Set-up Help? (800) 650-3637
SMART CAREGIVER CORPORATION
Tel: 800-650-3637
| www.smartcaregivercorp.com
Install
Batteries
1
Test the system. (A) Put pressure on the sensor pad to activate the pad and
the fall monitor. The fall monitor will beep two times to indicate that the
sensor pad and the fall monitor are in use. The “Status” light will blink while
pressure remains on the pad. (B) When pressure is removed, the fall monitor
will sound the alert tone. Press the Reset button to silence the alert .
Test the System - Sensor Pads
2
A.
B.
Reset
Button
3
Reset
Button
Test the System - Floor Mats
Mounting the TL-2100CP
4
Mounting screw
in headboard
or wall.
Monitor may mounted to a bed or a chair with the included locking mounting strap.
Hang the monitor on
the screws using the
mounting holes on
back of the monitor.
1
1
2
2
Change Pad
Indicator
™
Function
Note: The Change Pad Indicator
™
function
does not work with floor mats.
Step on the floor mat.
The alert will sound. Press the Reset button to silence and reset the monitor.
Resetting the Monitor/ Tamper Proof™ Mode with Caregiver Key™
(Optional)
For more information about the
Caregiver Key™ and how it can be used in
your facility’s Fall Assessment Program
call 800-650-3637
The Change Pad Indicator™ technology has an internal clock which begins timing
the life of a Timed sensor pad once the pad has been plugged into monitor and
pressure is on the pad. The pad timer will only record “time in use” : time when the
pad is plugged into the monitor and pressure is on the pad.
Ten days before the Timed sensor pad life expires, the Check Pad light on the
monitor will illuminate and the monitor will chirp, alerting caregivers to replace
the sensor pad. During this period, the monitor will still operate normally and
may be reset. When the sensor pad life has expired, the system may no longer be
reset, and a new sensor pad is required.
NOTE: The TL-2100CP Change Pad Indicator™ function only works with the Change Pad Indicator™
Timed Sensor Pads. Standard Smart sensor pads will work with the TL-2100CP Monitor, but will
not cause the “Change Pad” light to illuminate when the pads have expired, therefore caregivers
must manually track the life of the pad.
Cha
nge
Pad
Ind
icat
or™
Sen
sor
Pad
Change Pad Indicator
Check
Pad
Low
Battery
Monitor Status
Active When Blinking
Pad and Monitor
Reset
Refer t
o User Instruc
tions
befor
e changing this setting
.
Reset Butt
on-
ON
Reset Butt
on OFF
U
se C
ar
eg
iv
er Key
To T
ur
n
OFF
6V DC
300mA M
AX
-
Change Pad Indicator
Check
Pad
Low
Battery
Monitor Status
Active When Blinking
Pad and Monitor
Reset
W
arning:
Failur
e t
o c
omply with w
arning ma
y r
esult in injur
y
or dea
th.
This devic
e is not suitable f
or all individuals
. O
ther
devic
es ma
y be r
equir
ed
. This devic
e is not a substitut
e f
or
visual monit
oring b
y c
ar
egiv
er. S
ensor pad fall monit
ors ar
e
pr
one t
o diffic
ulties
. B
e sur
e c
or
d c
annot en
tangle or chok
e the
user
. The manufac
tur
er does not claim tha
t this devic
e will
stop elopemen
t and/or st
op falls
. This devic
e is designed t
o
agumen
t c
ar
egiv
ers c
ompr
ehensiv
e r
esiden
t mobilit
y
managemen
t pr
ogr
am.
Test this devic
e bef
or
e each use
.
Read the instruc
tions and legal disclaimer
.
Read Instruc
tions B
ef
or
e U
se:
Batt
er
y not included
. U
se 3 x AA alk
aline B
att
eries
.
Set Up: Plug sensor pad in
to the fall monit
or. A
pply pr
essur
e t
o
the sensor pad t
o t
est the syst
em.
The monit
or will emit t
wo
beeps
, indic
ating tha
t the syst
em is w
ork
ing
. The
Monit
or
Sta
tus
LED will blink ev
er
y 3 sec
onds when the syst
em is
ac
tiv
ated and oper
ating pr
operly
.
Delay
2sec 1sec 0sec
3 2 1
Dcrease/Increase
Volume
Tone
Change Pad Indicato
r
™
Change Pad Indicato
r
™
Change Pad Indicator
Check
Pad
Low
Battery
Monitor Status
Active When Blinking
Pad and Monitor
Reset
FLOOR MAT
Change Pad Indicator
Check
Pad
Low
Battery
Monitor Status
Active When Blinking
Pad and Monitor
Reset
Alert Volume
Adjustment
Tone
Adjustment
Alert Delay
Adjustment
The battery compartment
door is secured with the
included Phillips-head screw
Close battery door and secure
it with small Philips-head
screw.
Place monitor back into its
plastic protective boot.
“Reset Button ON” Mode
Press the Reset button to reset the
monitor.
“
Reset Button OFF, Use
Caregiver Key™ To Turn OFF
”
Mode.
Place the Caregiver Key™ over the red dot to reset the monitor.
Caregivers can choose to reset the
TL-2100CP in either of two ways:
Select either “
Reset Button ON”
or
“
Reset Button OFF, Use
Caregiver Key™
To Turn OFF
” with the switch on the side
of the TL-2100CP Fall Monitor.
1. Press the
Reset
button on the front of
the monitor (“
Reset Button ON
” mode).
2. Place the optional Caregiver Key™ over
the red dot on the front of the monitor.
(“
Reset Button OFF, Use
Caregiver
Key™ To Turn OFF
” mode).
This mode allows only the caregiver to
reset the monitor.
TL-2100CP
