SMART SRS-LYNC-L, Software Configuration Manual

Page: 7 / 208

SOFTWARE CONFIGURATION GUIDE
SMART ROOM SYSTEM FOR MICROSOFT LYNC
5 smarttech.com/kb/170608
Task
A USB mouse and keyboard are connected to the Lync appliance for use during the
software configuration.
Starting your room system for the first time
Starting your room system
The procedure for starting your room system depends on the room size.
Room size Procedure
Extra small room Page 5
Small room Page 6
Medium room Page 7
Medium room with dual panels Page 8
Large room Page 9
Extra large room Page 10
To start your extra small room system
1. Flick the power switch on the bottom of the interactive flat panel.
2. Press the Input Select button on the interactive flat panel’s
front control panel until the input source is HDMI1 .
The Lync appliance begins the first-run installation process. During this process, the Lync
appliance restarts several times.
NOTE
This process takes time to complete. During this process, displays might not change
content or might appear blank for several minutes.
3. Press MENU on the interactive flat panel’s remote control.