SMART Podium 624, User Manual

Page: 23 / 66

CHAPTER 2
INSTALLING THE INTERACTIVE PEN DISPLAY
13 smarttech.com/kb/171254
You must install SMART Product Drivers on the computer connected to the interactive pen display
to enable the display's surface to respond to the touch by the cordless pen or your finger. Use your
computer's mouse and keyboard to install SMART Product Drivers before you install the interactive
pen display. The interactive pen display cannot provide keyboard or cordless pen functionality
until you install SMART Product Drivers.
Setting up your work area
Organize your work area so you can work comfortably. Position the interactive pen display and
your keyboard for easy access without unnecessary reaching.
You can also mount the interactive pen display on an articulated arm or other third-party stands
meeting the VESA 200 × 100 specification for display stands.
Changing the angle of the interactive pen display
You can recline the Smooth Tilt Stand to change the angle and height of the interactive pen
display. To alleviate glare, you can use the attached Smooth Tilt Stand to change the display's
angle. See Removing and installing the Smooth Tilt Stand on the next page.
To change the interactive pen display's angle
1. Grab the top of the interactive pen display and pull up on the lever at the top of the stand.
2. Push the interactive pen display down or up to adjust the angle of the display.
3. Release the lever to lock the stand in place.