SMART PCIE-6001, Installation And Use Manual

Page: 34 / 48

34 PCIE-6001 Installation and Use (6806800U73B)
Functional Description
Functional Description
3.3 CPLD
CPLD is used on the board to provide a combination of glue logic and PCIe sideband
support. The 256-pin FTBGA package is used. The CPLD functions include the following:
 Power Monitoring and Sequencing
 Temperature Monitoring
 Reset Control
 Additional Glue Logic
3.4 M.2/NGFF Card Sockets
The primary purpose of the PCIE-6001 is to extend the storage capabilities of the MaxCore
chassis by providing four M.2/NGFF card sockets for solid state drives.
PCIE-6001 supports all standard module sizes for Socket 3 (2242, 2260, 2280 and 22110)
for both single and dual-sided modules (S1-S3 and D0-D5). It supports only AHCI and
NVMe SSD modules. SATA is not supported in PCIE-6001 card and installing a SATA
module will cause damage to both the module and the card.
The sockets are mounted horizontally and accept M.2 AHCI/NVMe SSD modules in 2242,
2260, 2280 and 22110 sizes utilizing either the “M” or “B + M” key.
Figure 3-2 Supported M.2/NGFF Module Keying