SMART LightRaise Installation and User's Guide
27
2. Installing the Boom
This procedure involves the following steps:
•
attach the LightRaise boom
•
finish the boom installation
Attaching the Boom
Slide the boom into the pivot base and lock it into place. Secure the struts in place, affix the
cover concealment labels and raise the boom to its operating position.
Tools required:
Hardware required:
•
Phillips #2 hand screwdriver
•
boom
•
#10-32
x
5
/
16
" Phillips screws (from boom
accessory kit)
•
lock washers for pivot (from boom accessory
kit)
•
cover concealment labels (from boom
accessory kit)
To attach the LightRaise boom:
1
Carefully lift the boom shaft above the pivot base and guide it into the slots in the pivot
base.
Slot for Boom Shaft
Boom Shaft
Pivot Base