User Manual
7
Note:
1. Click the "Reset" icon in the main interface to reset the treatment parameters to zero.
2. Click the "Save" icon in the main interface to save the set treatment parameters as a treatment
plan. After entering the name, you can find this treatment plan on the "Pre-set Protocol"
interface.
3, The following table shows whether the corresponding parameters can be set and displayed in
the four modes:
3.4 Starting The Treatment
In the main interface, after setting the parameters, click "Ready" to enter the "Ready" state, press
the button of the treatment handle, and the treatment head emits light to start treatment.
Note:
After setting the treatment time, the interface will count down to display the remaining
treatment time.
3.5 After The Treatment
When the treatment is completed, the interface will display a note to confirm whether to save
the treatment record or not. Click Yes to save the treatment record.
power Pulse width(ms)
Pulse delay(ms) Timer
Pulse Number Total Joules
CW
Yes
No
No
Yes
No
Yes
Repeat
Yes
Yes
Yes
Yes
Yes
Yes
Pulse
Yes
Yes
No
Yes
No
No
B
Yes
Default 100
Default 100
Yes
Yes
Yes
