SMART FSE-400 User Manual Download Page 15 | Manualshive

Page: 15 / 21

SMART FSE-400 User Manual Download Page 15

Chapter 3

smarttech.com/kb/171625

15

Chapter 3:

Using the stand

Moving the stand

Raising and lowering the stand

Resetting the stand

Unlocking the height-adjustment safety lock

Raising and lowering the stand

Setting height limits

Moving the stand

WARNINGS

l

Do not use the handles to lift the stand.

l

Do not move the stand while external cables are connected or when the power is on.

l

Move the display to its lowest position before you move the stand.

l

Secure all cords and cabling before you move the stand.

l

Two or more people are required to move the stand.

l

Move a floor stand-mounted display with care. Quick stops, excessive force, and uneven surfaces

may cause the stand to overturn.

To move the stand

1. Shut down the mounted display and accessories.

2. Press down and hold the control switch until the display reaches its lowest position.

3. Flick the power switch to the off position.

4. Remove all loose items from the stand and the storage cabinet.

5. Unplug the stand from the power outlet and secure all cables.

6. Flip the caster brakes up to unlock them.

«
...
13
14
15
16
17
...
»

Summary of Contents for FSE-400






















Reviews:

No comments