SMART fortwo 2015, Owner'S Manual, Page: 125 / 228

C
6 Fuel level ( Y page 121)
D
eco score display ( Y page 109)
Reserve fuel display ( Y page 121)
E
b
Brake lamp failure warning lamp
( Y page 132)
F
Total distance recorder
G
V Cruise control ( Y page 113)
È Limiter
Vehicles with automatic transmission
:
Time ( Y page 124)
;
Drive program (
Y
page 100)
=
u
Gearshift recommendation
(
Y
page 102)
?
Transmission display
h
Standard display or
=
Gear indicator (manual mode)
S
Transmission malfunction
( Y page 104)
A
¤
Lane Keeping Assist indicator lamp
( Y page 118)
B
Outside temperature display
(
Y page 120)
C
Trip meter ( Y page 123)
Current fuel consumption ( Y page 124)
Service display ( Y page 175)
D
Restarts the tyre pressure monitor
(
Y page 205)
E
6 Fuel level ( Y page 121)
F
eco score display ( Y page 109)
Reserve fuel display ( Y page 121)
G
b Brake lamp failure warning lamp
( Y page 132)
H
Total distance recorder
I
V
Cruise control ( Y page 113)
È
Limiter
Menus and multi-displays
Overview
The arrangement of the menus and displays
can be envisaged as a circle.
X
To scroll: repeatedly press the
´
button
on the multifunction lever.
The menu functions/displays are shown one
after the other.
i
If the
´
button is pressed and held for
approximately 3 seconds, the trip meter
appears directly on the display.
Depending on the vehicle equipment, you can
call up the following menus/displays one
after the other:
R
display and reset the trip meter
(
Y page 123)
R
display the current fuel consumption
(
Y page 124)
R
display the service due date ( Y page 175)
R
set the time menu ( Y page 124)
R
Restarting the tyre pressure monitor
(
Y page 205)
Resetting values
You can reset the trip meter data and the eco
score display (
Y page 109). You can only reset
the eco score if the display is showing the
current fuel consumption.
X
Repeatedly press the
´
button on the
multifunction lever until the display shows
the trip meter data or the current fuel con-
sumption.
X
Press and hold the
b
button on the mul-
tifunction lever.
The trip meter value or the eco score dis-
play flashes for approx. 3 seconds. The data
is then reset.
The count in the eco score display only
reappears once a distance of approx. 400 m
has been covered. If the ignition remains
switched off for longer than four hours, the
eco score display in the on-board computer
will be automatically reset.
X
When the value has been reset, release the
b
button.
If you release the
b
button earlier, the
data shown will not change.
Displays and operation
123
>> On-board computer and displays
.
Z