SMART Board MX (V2) Series, Installation And Maintenance Manual

Page: 45 / 80

Chapter 4
35 smarttech.com/kb/171555
Chapter 4: Maintaining the display
Turning off, turning on, and resetting the display 35
Cleaning and maintaining hardware 36
Checking the display installation 36
Cleaning the screen 37
Cleaning the touch sensors 37
Maintaining ventilation 38
Preventing condensation 38
Replacing the pens 38
Removing and transporting the display 39
Updating system software 40
Applying an automatic system software update manually 40
Updating system software manually 41
With proper maintenance, the display will provide years of use.
Turning off, turning on, and resetting the display
In most situations, you can put the display to sleep when not using it following the instructions in the
SMART Board MX (V2) series interactive displays user guide ( smarttech.com/kb/171554 ).
In some situations, such as when you transport the display or clean its screen, you need to turn off
the display for a period of time. You can turn it back on after.
You can also reset the display.
To turn the display off
1. Press the
Power button on the front control panel or the remote control for four seconds.
A slider appears on the screen.
2. Move the slider to the right.