SMART BOARD 8055i-G5, Administrator'S Manual

Page: 67 / 84

APPENDIX B
REMOTELY MANAGING THE INTERACTIVE FLAT PANEL
57 smarttech.com/kb/171000
Command Possible values Response Standby
mode
set treble [Value] + [Incremental value]
- [Incremental value]
=0–100
treble= [Value] No
set bass [Value] + [Incremental value]
- [Incremental value]
=0–100
bass= [Value] No
set audioeq120 [Value] =0–100 audioeq120= [Value] No
set audioeq500 [Value] =0–100 audioeq500= [Value] No
set audioeq1200 [Value] =0–100 audioeq1200= [Value] No
set audioeq7500 [Value] =0–100 audioeq7500= [Value] No
set audioeq12k [Value] =0–100 audioeq12k= [Value] No
set balance [Value] + [Incremental value]
- [Incremental value]
=0–100
balance= [Value] No
set soundreset [Value] =yes soundreset= [Value] No
System information
Use the following commands to identify system information settings.
Command Response Possible values Standby
mode
get autopoweroff autopoweroff= [Value] 15–240 No
get fwverscr fwverscr= [Value] [Scalar version firmware number] Yes
get fwvertouch fwvertouch= [Value] [Touch controller firmware version
number] Yes
get serialtouch serialtouch= [Value] [Touch controller serial number] No
get opsinfo opsinfo= [Value] OPS
NO OPS
No